Gel Candles for Home-Based Business Idea

Gel Candles for Home-Based Business Idea

You can make gel candles at home using many DIY tutorials, and of you are creative enough in making gel candles, you can surely make it a profitable business. Gel candles are perfect as gifts, give away whenever there are birthdays, anniversaries, weddings and other occasions.

BASIC INSTRUCTIONS:

Melting  

Follow regular candle making safety guidelines for heating, pouring and burning. Melts at approximately 180-200 degrees & will take considerably longer to melt than wax. A covered Presto Kitchen Kettle, or similar, works great.

 

Wicks

We recommend using Gelwicks™ for containers up to 2 or 2.5″ diameter. Coreless Cotton container wicks can also be used if you prefer not to use a zinc core. Test burning will be necessary to determine proper size for your application. Gel works best in containers no larger than 2.5 – 3 inches in diameter. Multiple wicks are not recommended.

 

Fragrance

It is recommended to use non-polar candle fragrance oils, with a flash point of 170 or higher. Stir thoroughly & be sure they blend well. Recommended amount is up to 3% (.48 or approx. 1/2 oz) per pound for CLP, up to 5% (.80 or approx. 3/4oz) for CMP & up to 5% (.80 or approx. 3/4 oz) for CHP. NOTE: It is important to follow these guidelines for making safe gel candles!

 

Coloring

It is recommended that less dye be used than in regular candles if you want to maintain the translucency of the gel. We recommend liquid dyes. Color Blocks can also be used by shaving off tiny bits and melting into the gel.

 

Embedding

Non-flammable objects may be embedded in this gel, just let it cool to approximately 100 degrees before embedding. Clean your seashells and other embed items so they are free of any residue by washing them with warm mineral oil. This will help keep the gel from clouding and help reduce air bubbles. We recommend using only gel safe fragrance oils in your wax embeds.

 

Making Your Own Gel Wax From Scratch:

It is the best way to go making your own gel wax from scratch. Many people opt to make their own gel because it can be a lot cheaper than buying it pre-made plus you can control its density.

Ingredients needed:

CP9000 Thermoplastic Resin Powder

White Mineral Oil with a flash point of 3750 F

You can choose between:

Low Density Gel (1lb Mineral Oil and 0.9 oz Resin)

Medium Density Gel (1lb Mineral Oil and 1.1 oz Resin)

High Density Gel (1lb Mineral Oil and 1.25 oz Resin)

Stand Alone Density Gel, which does not require a container to hold it. But does need to be on a stand of some kind. (1lb Mineral Oil and 1.4 oz Resin)

Directions:

  1. Choose your desired density; mix the proper amounts of mineral oil and resin.
  2. Once mixed well, let sit for 1 hour.
  3. When the mixture has sat for 1 hour, mix well until all the lumps are gone.
  4. Heat your mixture up to 220° F on your stovetop, as your gel heats it will turn clear.
  5. Pour your gel into a container and let it cool, once the gel has cooled seal with a tight lid.

image source: here

Disclaimer:

To all the readers of this website Thebrightinvestor.com, please read carefully and understand this disclaimer before you use or implement all the contents found here. Some of the posts are risky to use if you are a beginner.

All the post and contents of this website Thebrightinvestor.com is for public information only, however we cannot guarantee the accuracy, completeness, or the assurance that will work for you if you implement some of the tutorials posted on this website. We are working to the best of our skills to make this website updated and working, but due to the fact that every seconds there some updates taking place on the World Wide Web it’s out of our control if some of the contents here will not work. Read More....

Related Articles